Telephone Image

Telephone: 01924 360 260

Presentation Image

Shopping Cart Image Your shopping cart is empty

View Basket | Checkout


  •
  • Pumaspeed 141 bhp power Kit Pumaspeed 141 bhp power Kit
    Instant Bolt on Power kit for all mk7 Fiesta 1.6 1.4 and 1.25. Click here for more info
  • Ken Block Style Wide Arched Fiesta Ken Block Style Wide Arched Fiesta
    Full Blown wide Arched Body Kits available from 1500 pounds
  • Fiesta Focus RS Look-a-like Systems Fiesta Focus RS Look-a-like Systems
    This Unique Pumaspeed System is available from all Official Pumaspeed Dealers. Click for more info
  • Focus RS II Focus RS II
    Easy DIY 400 bhp Bolt on Power Kit
  • All Make Milltek Stockist All Make Milltek Stockist
    Pumaspeed are the Official Ford Distribution partner for the UK We Export all Milltek Sport Stainless Steel Exhausts Worldwide !
  • All Make Milltek Stockist All Make Milltek Stockist
    Pumaspeed are the Official Ford Distribution partner for the UK We Export all Milltek Sport Stainless Steel Exhausts Worldwide !

Model Select

Fiesta
Puma
Focus
KA
Mondeo
S-Max
RS Models
ST Models
EFR Turbos
Home

You are here: Home | Silicon Hoses | Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe

Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe

Ford Focus RS Mk2 2009 63mm Large Bore inlet pipe at Pumaspeed

Smooth pipework allows maximum airflow.

RRP: £ 119.99 (inc. VAT)

Our Price: £109.99 (inc. VAT)

Fully Fitted: £175.99 (inc. VAT)

Hose Colour Choice

Order quantity

  

Ford Focus RS Mk2 2009 63mm Large Bore inlet pipe at Pumaspeed
  • Replaces the OE restrictive Plastic Pipework
  • One Piece Silicon construction so no Leaks
  • Available in all Colours to match existing Roose hoses

 

Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe.

The new Focus RS 2009 Mk2 Silicon Inlet Pipe will enable the air flow from all intercoolers to pass quickly and without restriction into the throttle body.

The Standard 3 piece tube that flows from the intercooler to the throttle body has a very restrictive section that when measured is less than 50mm in some places. Can 400+bhp flow thru this ??

After a request from Pumaspeed back in 2009 Roose Motorsport have finally come up with the answer to the Over 400bhp problem.With over 30% more cross sectional area this new pipe with drastically reduce the restriction withing this OE pipework and allow more flow when required at the Mid and Top end.

We think its a must for all 400+ power kits.

Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe.

The Pumaspeed Workshop team are ready to fit the Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe in our Head Office located here.

We estimate the labour time to be approximately 1.00 hour(s) costing £66.00 inc VAT.

Therefore making parts and labour a total cost £175.99 (inc. VAT).

Please don’t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

The Ford Focus RS Mk2 2009 63mm Large Bore Inlet pipe product has been listed by Pumaspeed as fitting the following vehicles:

Focus RS Mk2 2009